A passive radon stub-up: a builder's rough-in running from under the slab toward the roof, with no fan on it. It vents some gas by natural draft. If the house tests at 4 pCi/L or above, adding a fan turns it into a full active system.
More detail
Builders across the metro's newer plats rough these in because the marginal cost during construction is small: a tee into the sub-slab gravel, a pipe chase to the attic, sometimes an electrical junction box waiting nearby. Natural stack effect pulls a little air up the pipe, which helps some houses somewhat, but passive performance is modest and unpredictable next to a fan's steady suction, which is why testing remains step one even with the pipe in place. Two things are worth checking on yours. First, where it ends: a proper stub-up continues through the roof, while some end in the attic, which an activation visit corrects, since a fan must never discharge into attic air. Second, what the slab termination looks like, because a pipe that dead-ends in dirt rather than gravel moves less air. Activation is quick work for an Iowa-certified pro, typically $650 to $1,100, and the independent verification test afterward confirms the result like any install.