Central Iowa radon by county and community
Every county in Iowa is EPA Radon Zone 1, the tier where predicted average indoor screening levels exceed 4 pCi/L, on the EPA's Iowa zone map. Iowa is the only state where that is true of all 99 counties, and the measured data back it up: the Iowa Radon Survey found 71.6 percent of homes above 4 pCi/L and a state average of about 8.5 pCi/L.
County-by-county survey medians for central Iowa are not published in a form we could verify, so we have not printed any. The rows below pair what is verified statewide with what shapes a test and a system in each community: the county, the housing era, and the foundation details that decide how a fix is designed. The EPA is clear that no map predicts a single house; only a test in the lowest lived-in level of your own home does.
| County or community | County and EPA zone | What the data and the housing say |
|---|---|---|
| Iowa, statewide | All 99 counties Zone 1 | Iowa Radon Survey: 71.6% of homes above 4 pCi/L, the largest share nationally; average about 8.5 pCi/L vs 1.3 national. Lab data 2008-2017: 58% of 95,245 tests above 4. |
| Polk County | Zone 1 | The metro core and inner suburbs, on Des Moines lobe till. Housing spans pre-war clay-tile basements to 2020s poured walkouts. |
| Dallas County | Zone 1 | The fastest-growing county in the metro. Newer poured basements, many with passive stub-ups roughed in by the builder. |
| Warren County | Zone 1 | Commuter growth around Norwalk, an older county seat in Indianola, and rural acreages on private wells. |
| Des Moines | Polk / Zone 1 | Foursquares and bungalows over full basements, many on block or clay-tile walls with floors poured in sections. Expect wider sealing scopes. |
| West Des Moines | Polk, Dallas, Warren / Zone 1 | Valley Junction pre-war stock on sandier river soils; walkouts and two-stories westward toward Jordan Creek. |
| Ankeny | Polk / Zone 1 | Mostly post-1995 poured basements; many recent builds include a passive stub-up that only needs a fan after a high test. |
| Urbandale | Polk, Dallas / Zone 1 | 1950s-1970s ranches and split-foyers on block walls east of the interstate; newer poured stock on the Dallas County side. |
| Johnston | Polk / Zone 1 | Walkout basements stepped toward Beaver Creek. Tight till can limit suction reach, so diagnostics before coring matter. |
| Waukee | Dallas / Zone 1 | Nearly all post-1995 construction with sump baskets on perimeter tile; stub-ups common in the newest plats. |
| Clive | Polk, Dallas / Zone 1 | Block-basement ranches on the east end, poured walkouts along the Greenbelt; creek-valley fill moves gas readily. |
| Grimes | Polk, Dallas / Zone 1 | Young poured slabs that usually need one suction point; an older grid of mid-century houses needs more sealing. |
| Altoona | Polk / Zone 1 | Newer plats east of Highway 65, older block-wall houses near the rail line. Slab-on-grade villas appear in newer streets. |
| Pleasant Hill | Polk / Zone 1 | Split-foyers and walkouts on loess-capped bluffs; multiple slab levels sometimes take a suction point per pour. |
| Norwalk | Warren / Zone 1 | Fast-growing plats of poured walkouts; rural edges on private wells add a water question after a high air test. |
| Indianola | Warren / Zone 1 | Stone and clay-tile foundations near the square and Simpson College are the hardest sealing jobs in the metro. |
The next step is the same in every row: test the lowest level people actually use, during the heating season when you can, and act on a result of 4 pCi/L or more. Between 2 and 4, the EPA recommends considering a fix. A paid test or install in Iowa requires an Iowa HHS credential, and the test after an install comes from someone outside the installer's firm.
For the geology behind these rows, read why Iowa leads the nation. For what a fix costs by foundation type, see the pricing guide.
Data sources
Ready to get started?
The Iowa Radon Survey found 71. Mon-Sat 8am-7pm.